dotfiles/system/hardware/bpi_r3/mt7986-default-bootcmd.patch
2023-06-14 17:26:54 +07:00

76 lines
2.3 KiB
Diff

diff --git a/include/configs/mt7986.h b/include/configs/mt7986.h
index 0c41af1fc3..4ddf3cef89 100644
--- a/include/configs/mt7986.h
+++ b/include/configs/mt7986.h
@@ -9,6 +9,8 @@
#ifndef __MT7986_H
#define __MT7986_H
+#include <linux/stringify.h>
+
/* Uboot definition */
#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
@@ -18,4 +20,61 @@
/* DRAM */
#define CFG_SYS_SDRAM_BASE 0x40000000
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0)
+
+#include <config_distro_bootcmd.h>
+
+/*
+ * Linux mt6978a.dtsi defines reserved memory in the first 256MB:
+ * 0x4300_0000 - 0x4302_FFFF
+ * 0x4FC0_0000 - 0x4FCF_FFFF
+ * 0x4FD0_0000 - 0x4FD3_FFFF
+ * 0x4FD4_0000 - 0x4FD7_FFFF
+ * 0x4FD8_0000 - 0x4FDA_3FFF
+ *
+ * Getting uboot to obey these by adding them into the DTS here
+ * got it respecting them. To not clobber these memory addresses
+ * fdt_high and initrd_high are being set.
+ */
+
+/*
+ * Do not relocate FDT, because relocate fails to alloc when
+ * initrd_high is set to 0x4FC0_0000 to keep initrd out of
+ * reserved memory. This is irregardless of the reserved
+ * addresses above still being valid as far as configuraiton
+ * is concerned at that point, so I'm at a loss.
+ */
+#define FDT_HIGH __stringify(0xffffffffffffffff)
+/* No reloc might work now that FDT is in-place, but this should be more compatible */
+#define INITRD_HIGH __stringify(0x4fc00000)
+
+/* Seems to be the address uboot would relocate to so place there */
+#define KERNEL_ADDR_R __stringify(0x43200000)
+/* Right before the kernel, after that reserved memory, probably best spots exist */
+#define FDT_ADDR_R __stringify(0x43030000)
+
+#define RAMDISK_ADDR_R __stringify(0x4b100000)
+
+/* Anything different means no-boot */
+#define BOOTM_SIZE __stringify(0x10000000)
+
+/* These can be outside Linux's 256MB */
+#define SCRIPTADDR __stringify(0x90000000)
+#define PXEFILE_ADDR_R __stringify(0x90100000)
+
+
+/* No comp_addr supplied */
+#define CFG_EXTRA_ENV_SETTINGS \
+ "bootm_size=" BOOTM_SIZE "\0" \
+ "fdt_addr_r=" FDT_ADDR_R "\0" \
+ "fdt_high=" FDT_HIGH "\0" \
+ "initrd_high=" INITRD_HIGH "\0" \
+ "kernel_addr_r=" KERNEL_ADDR_R "\0" \
+ "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
+ "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
+ "scriptaddr=" SCRIPTADDR "\0" \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ BOOTENV
+
#endif